Top Magnetic Door Lock System Installation & Repair Service NYC

When you need to install a locking system on any door, traditionally, you will go for a deadbolt, or lock and key mechanism. Magnetic and electric locks are the other options that you can also look at. You can find these in many shapes and sizes, each of which is specialized for use in different door configurations.

 

How Do Magnetic Door Locks Work?

Before we go into our magnetic door lock system installation & repair service in NYC it is important that you understand the various moving parts of magnetic locks and how they work. They have two main parts, a mounting mechanism, and the required wiring that will connect it to a power source. One part is attached to the door, and the other part is attached to the frame, in such a way that the sides that are magnets face each other. Some doors or frames may not allow direct mounting, and in such cases, you need to have mounting plates to mount the magnetic lock parts on.

One of the parts is already attached to wires, which then need to be connected to a power supply, either the main or a dedicated power supply. One part is an electromagnet while the other is the armature with a coil. Magnets are attached to frames, while the armature plate is fitted on to the door. Once power is applied to the armature, when the door is in a closed position, it energizes the magnet and attracts the armature plate so that the door is then prevented from opening.

magnetic-door-lock-system

The mechanism that operates magnetic locks is considered fail-safe. They have an armature and coil assembly that gets magnetized with the passing of an electric current. Once power is supplied, the magnet gets activated, and this results in the two parts, one on the door and the other on the frame, to get attracted to each other, and they then adhere to each other, resulting in the door getting locked. Switch off the power through the switch provided, and the door will then unlock. These locks are ideal for doors that need to be opened in an emergency, as quite often in such cases, power is often cut off, and results in escape and emergency doors being automatically open.

 

Where Else Are They Ideal To Use?

Magnetic locks are also ideal for any office that have just one or more ways to enter or exit, and whose entry needs to be controlled. Such doors use keypads to keycards for entry and it is the codes in these devices that are used to send the necessary signals for cutting off the power so that the door opens. For purposes of safety, this cut of power will last only for a short time, and the door will automatically get locked again, once its closing mechanism operates and closes the door. This system allows for controlled entry to only people who are authorized to enter and exit. Magnetic locks can also be used in glass doors whose access needs electronic control, standalone doors, and those that need a basic and inexpensive method for controlling access.

 

What Is The Installation Process Like?

Magnetic door lock system installation is simple and such locks can even be fitted in any doors that were earlier using other methods for locking. All that the installation requires is the drilling of holes into frames and doors to install its parts. Most magnetic lock manufacturers provide you with detailed instructions on installation, and some of them may even have videos that make it very simple to follow for the installation. The holes need to be drilled in the door and the frame that allows the brackets that hold the locking parts. One of these parts will also be wired, and these wires then need to be connected to the power sources, after which the lock can be tested.

magnetic-door-lock-system-installation-repair-service-in-NYC

Testing is a very important part of the installation process. Once the power is switched on, the door should lock, and once the power is switched off, the door should unlock. It is always better to install a magnetic lock that has a manual override key that can be used in emergencies, or when the lock is malfunctioning. You need to make sure that this backup key is only given to authorized persons, and kept in a secure place to avoid any tampering.

It is not uncommon to have a magnetic door lock system installation carried out along with an access control system that will identify any keypad codes or key cards that authorized people are given for the ease of entry and exit. So, when these entry/exit devices are used, the access control system will send the necessary instructions to the magnetic lock to cut off power for unlocking the door. These access control systems can be programmed for cutting off the power for just a few seconds so that the door automatically gets locked again, once the authorized person has entered or exited.

The holding force that keeps magnetic locks effective can vary from as much as 250 kg and go up to 1000 kg. This will depend on the strength of the electromagnetic force ad the voltage used for operating the magnet. Power is required for the locks to operate, and that is what makes these locks failsafe, and ideal for use on emergency doors.

 

Call Now For A Free Quote

Magnetic locks are easy to install and are considered as very secure locks. They are locks of choice for offices, commercial properties, hotel rooms, and even in use in residential properties. For a free quote, call us at (800) 968-2515 today!

Summary
Magnetic Door Lock System Installation & Repair NYC
Service Type
Magnetic Door Lock System Installation & Repair NYC
Provider Name
365 Locksmith Inc,NY,NY- Telephone No.(800) 968-2515
Area
NYC
Description
When you need to install a locking system on any door, traditionally, you will go for a deadbolt, or lock and key mechanism. Magnetic and electric locks are the other options that you can also look at. You can find these in many shapes and sizes, each of which is specialized for use in different door configurations.